Category: Woodworking jigs

Beech Beam Compass

Beech Beam Compass It is shown with a 12″ beam but the beam is just a 1″ x 3/4″ piece of lumber It can be […]

I made this router lift over ten years ago. It started out in an old Craftsman Table saw. It then went into the top of […]

Here is the beam compass made for the 2013-2014 Lumberjock swap. The compass is made to be used with either the marking pins or a pencil. […]

My DIY Steamer This is what I ended up with. This happens to be an old pressure cooker, but almost any pot with a cover […]

Thickness Jig For the Belt Sander I have this Ridgid Belt sander that i made a thickness sander jig for. It’s pretty simple and is […]