5 ½” Hunter – EDC – Making Mosaic Pins


5 ½” Hunter – EDC – Making Mosaic Pins

  • Steel –  1/8” 1095
  • Blade 5 1/2”
  • Overall – 10 7/8”
  • Scales – Stabilized Spalted beech, dyed red

Making Mosaic Pins

If you choose, you can make your own mosaic pins. Mosaic pins are simply pins with a decorative look. To make a mosaic pin, simply fill a tube with whatever you think will look cool. Here is a few I did. First fill the tube with colored epoxy (you can spoon it in, use a syringe, or however you can devise to get the stuff in there. Then I added regular wire.

Leave a Reply