Kephart EDC – Multi Part Handle Scales
Your thoroughbred camper likes not the attentions of a landlord, nor will he suffer himself to be rooted to the soil by cares of ownership or lease. It is not possession of the land, but of the landscape, that enjoys; and as for that, all the wild parts of the earth are his, by a title that carries with it no obligation but that he shall not desecrate nor lay them waste.Houses, to such a one, in summer are little better than cages; fences and walls are his abomination; plowed fields are only so many patches of torn and tormented earth. The sleek comeliness of pasture it too prim and artificial, domestic cattle have a meek and ignoble bearing, fields of grain are monotonous to his eyes, which turn for relief to abandoned old-field, overgrown with thicket, that still harbors some the shy children of the wild. It is not the clearing but the unfenced wilderness that is the camper’s real home. He is brother to that good old friend of mine who in gentle satire of our formal gardens and close- cropped lawns, was wont to say, ‘I love the unimproved works of God.’ He also published some more books of the same theme such as Camp Cookery (1910) and Sporting Firearms (1912). In addition, he wrote The Hunting Rifle section of Guns, Ammunition and Tackle (New York: Macmillan, 1904), a volume of Caspar Whitney’s prestigious American Sportsman’s Library. Combining his own experience and observations with other written studies, Kephart wrote a study of Appalachian lifestyles and culture called Our Southern Highlanders, published in 1913 and expanded in 1922. He wrote a short history of the Cherokee and other books which became standards in the field. Kephart completed a typescript for a novel in 1929. However, the book was not edited and published until 2009. It is published under the title Smoky Mountain Magic. Kephart never left the Great Smokies, having been instantaneously killed in a mountain-road automobile accident on April 2, 1931. My version of the Kephart EDC – Multi Part Handle Scales
- Blade 1/8” 1080 4 1/32”
- Overall length 9”
For these scales I used a piece of rosewood and a piece of spalted beech to make a two piece scale. First I made sure I had a good fit. Then I glued the pieces together while they sat on a piece of wax paper. The center piece in the picture is a single piece which then got cut down the center to form the two scales.The I epoxied g10 spacers on each scale. I used the wax paper to separate them so I could clamp them together and get a good bond. The handle of this Kephart EDC was finished with the help of 2″x72″scalloped belts. I have then in 220, 320 and 600 grit. Then I finished with 1000 and 2000 grit felt backed belt.
Shown with the Wooden Lined Knife Sheath