Shop Tip: Don’t throw the old gloves away. They make good vise protectors
Continue reading
Lightweight Maple Bow
Lightweight Maple Bow This bow was made from a maple stave. It was pretty twisted and crooked. I’ve been heating, bending and clamping for a […]
Continue reading
3 Piece All Wood Take Down Longbow
The thought of building a three piece take down bow has kept me awake many nights. I’ve tried a few designs I’ve thought of and […]
Continue reading
DIY Bow Quiver
DIY Bow Quiver I figured if I was going to find the right piece of wood for a bow, make the bow, find the right […]
Continue reading
Thickness Jig For the Belt Sander
Thickness Jig For the Belt Sander I have this Ridgid Belt sander that i made a thickness sander jig for. It’s pretty simple and is […]
Continue reading
Laminated Two Piece Oak English Longbow
Laminated Two Piece Oak English Longbow Target length of this Laminated Two Piece Oak English Longbow was 78″ Target draw weight of this Laminated Two […]
Continue reading
Oak Board Bow with Walnut Backing
Oak Board Bow with Walnut Backing – An American Flat Bow style A slight recurve at 7″ This was done on a form with dry […]
Continue reading
Maple Backed Walnut Flat Bow
Maple Backed Walnut Flat Bow I think it’s ready for Tru oil. It started pulling 64#@28″ Which is a little heavier than I expected […]
Continue reading
Hickory Stick with a String (Primitive Bow)
Hickory Stick with a String (Primitive Bow) A very quick and dirty bow from a Hickory sapling. I left the bark on most of it. […]
Continue reading
Simple DIY Arrow Cresting
Simple DIY Arrow Cresting Crests are rings or bands of paint, often brightly colored, applied to arrows usually for the purpose of personalization. Like […]
Continue reading